SWITCHES, SWITCH PANELS, COUPLUNGS

Mini Add-A-Battery Kit

Simplifies switching and automates charging for a 65A,
two battery bank solution for outboard powered boats
• For alternators up to 65A
• Includes the m-Series Dual Circuit Plus Battery Switch 6011 and the m-ACR Automatic Charging Relay 7601

m-Series Dual Circuit Plus™ Battery Switch
• Switches two battery banks simultaneously while maintaining battery bank isolation
• Can combine two battery banks in the event of a low start battery
• IP66 - protected against powerful water jets (see inside back cover)

m-ACR Automatic Charging Relay
• Automatically combines battery banks when charging and isolates when discharging
• Start isolation protects sensitive electronics
• Dual Sensing senses charge on two battery banks
• IP67 - protected against immersion up to 1 meter for 30 minutes (see inside back cover)

Selector 4 position «Maxi» Heavy Duty

Switches isolated battery banks to all loads or combines battery banks to all load.
Surface, rear, or front panel mounting options.
Terminal studs made of tin-plated copper.

Includes Alternator Field Disconnect (AFD) which protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. If the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF.

Specifications:

Cranking Rating: 30 sec. 1,200A per circuit
Intermittent Rating: 5 min. 600A per circuit
Continuous Rating: 350A per circuit
Voltage Max. Operating: DC 32V

Cranking Rating (30 sec.): 900A
Intermittent Rating (5 min.): 500A
Continuous Rating: 300A
Voltage Max. Operating: 32V
Cable size: 4 AWG (120 mm²) 
Width: 2.83"
Height: 2.83"
Mounting Centers: 2.18"
Ingress Protected: IP66

OEM: 6007

Vibration, shock, thermoshock, moisture and salt spray resistant

Specifications:

Simultaneously switches two isolated battery banks or combines battery banks to all loads

• Make-before-break contact design allows switching without power interruption
• Ignition protected—safe for installation aboard gasoline powered boats
• Case design allows surface or rear panel mounting

97.79 x 97.79 x 78.67 mm
I cont.: 350 A
I inter. 5': 525 A
I inter. 10": 1000 A
UDC=32V
Pins: М10
Hole Ø: 9.2 mm

Cranking Rating (30 sec.): 900A
Intermittent Rating (5 min.): 500A
Continuous Rating: 300A
Voltage Max. Operating: 32V
Cable size: 4 AWG (120 mm²) 
Width: 2.83"
Height: 2.83"
Mounting Centers: 2.18"
Ingress Protected: IP66

OEM: 6007