SEA-DOO/CAN-AM
Products
SWITCH CONTURA SPDT (ON)-OFF-(ON), BLACK — BS8285
| Action | (ON)-OFF-(ON) |
| Pole / Throw | SPDT |
| Actuator Color | Black - Contura III |
| Common Applications | windlass, trim tabs, and powered hatches |
| Maximum Amperage | 20A @ 12V 15A @ 24V |
| Minimum Operating Temperature | -40° C |
| Maximum Operating Temperature | 85° C |
| Embedded LEDs | 0 |
| Seals | Internal and external gasket panel seal |
In stock
IP 67 CIRCUIT BREAKERS 48V/60A — K1307184 TREM
OEM: 7184B
| Specifications | |
| Amperage | 60A |
| Maximum Voltage | 48V DC |
| Mounting | Surface Mount |
| Circuit Breaker Type | Thermally responsive Bi-metal blade |
| Terminal Stud | M6 (accepts 1/4" Ring Terminal) |
| Terminal Stud Torque | 50 in-lb (5.65 Nm) |
| Interrupt Capacity | 3000A @ 48V |
| Minimum Operating Temperature | -40° C |
| Maximum Operating Temperature | 85° C |
| Circuit Breaker Class | Type III - switchable/manual reset - trip free |
| Weight | 0.50lb (0.23 kg) |
Order request
TERMINAL BLOCKS 30A — K0302506 TREM
Each screw pair is one isolated circuit. Terminal block jumpers allow creation of common circuits. Closed back design completely insulates power from the mounting surface. Bus material in Nickel-plated brass.
ОЕМ: 2506
| Specifications | |
| Circuits | 6 |
| Length | 4.38in (111.25 mm) |
| Maximum Voltage | 600V AC/DC |
| Continuous Rating | 30A |
| Base Material | UL 94 V0, PC |
| Bus Material | Nickel-Plated Brass |
| Mounting Screw | #10 [M5] |
| Screw Material | Stainless Steel |
| Screw Terminal Torque | 10 in-lb (1.13 Nm) |
| Terminal Screws | M4 |
| Wire Terminal Size | #8 [M4] |
| Weight | 0.21lb (0.1 kg) |
In stock
SOLENOID ADD A BATTERY MINI 65A — BS7649
Mini Add-A-Battery Kit
Simplifies switching and automates charging for a 65A,
two battery bank solution for outboard powered boats
• For alternators up to 65A
• Includes the m-Series Dual Circuit Plus Battery Switch 6011 and the m-ACR Automatic Charging Relay 7601
m-Series Dual Circuit Plus™ Battery Switch
• Switches two battery banks simultaneously while maintaining battery bank isolation
• Can combine two battery banks in the event of a low start battery
• IP66 - protected against powerful water jets (see inside back cover)
m-ACR Automatic Charging Relay
• Automatically combines battery banks when charging and isolates when discharging
• Start isolation protects sensitive electronics
• Dual Sensing senses charge on two battery banks
• IP67 - protected against immersion up to 1 meter for 30 minutes (see inside back cover)
In stock
12V DC SOCKET 2USB CHARGER 5V 2.1A — BS1016
- Compatible with popular mobile devices
- Internal fusing
- Conformal coated circuit board for the harsh marine environment
- Protective dust cap keeps debris and moisture out
- Mounts in a common 1-1/8" hole
SPECIFICATIONS:
| Maximum Output Current | 2.1A DC (total) |
| Input Voltage Range | 9V–32V DC |
| Output Voltage | 5V DC ±5% |
| Port Configuration | D +=2.0V, D-=2.8V |
| Parasitic Current Draw | 15mA |
| Thermal Overload Protection | Yes |
| Short Circuit Protection | Yes |
| Reverse Polarity Protection | Yes |
| USB | 2.0, Type A |
| Cutout Dimensions | 1-1/8" (29 mm) diameter |
| Regulatory | RoHS, CE certified |
In stock
ST-BLADE BATTERY TERMINAL MOUNT FUSE BLOCK — K1205023 TREM
Easily add 4 fused circuits to the terminal of a battery.
Provides power to new accessories in your boat or vehicle .
• Mounts on the battery terminal stud
• Screw terminals for securing wires
• Nylon insulated ring terminals included for each screw terminal
• Accepts small format circuit labels
• Insulating cover meets ABYC/USCG insulation requirements
• Ignition protected - for use in a gasoline engine compartment
• Includes four write-on circuit labels
• Includes four 16-14 AWG and four 12-10 AWG Nylon insulated ring terminals
• Fuses sold separately
Specifications:
Voltage Max. Operating: 32V DC
Amperage Max. Operating: 100A per block / 30A per circuit
Fuse Type: ATO or ATC Fuses
Bus Material: Tin-Plated Copper C11000
Mounting Thru-hole: Clearance for 3/8" [M10] stud
Screw Terminal: #8-32 Screws with captive star lock washer
Regulatory
Meets ISO 8846 and SAE J1171 external ignition protection requirements
In stock
