CLEANING & MAINTENANCE

Teak cleaning is normally a problem that is often solved by drastic methods such as sanding or the use of powder or extremely caustic detergents which will eventually severely damage the surface.

TEAK WONDER® CLEANER is a powerful cleanser that thoroughly cleans the teak easily and with very little effort, without the need for sanding. The product is neither caustic nor aggressive, and will not damage rubber seals, paint or hardware. The grey oxidisation and dirt are removed in a few minutes.
The cleaning process is carried out by wetting the surface to be cleaned thoroughly with fresh water, then apply the cleaner evenly and brush the deck with a soft bristle brush, across the grain (do not apply too much pressure, this avoids damaging the teak fibres).  Rinse the soapy solution off with plenty of fresh water and do not allow the wood to dry prior to starting the brightening process.
On heavily soiled surfaces, which have significant oxidisation or have not been cleaned for a long time, a second cleaning may be necessary before starting the brightening process.

Carefully wash away any product left on non teak surfaces.

The coverage is approximately 6-8 m2/ltr (depending on the condition of the wood).

23.5x9.5 cm

Sea-Line S1 preffesional Marine polishing paste is a very effective polishing paste. Does not contain silicone.
Recommended for polishing gelcoat surfaces, manufacturing composites, and topcoats. S1 quickly removes scratches and defects after sanding, guaranteeing an ideal surface. Includes high-quality polishing minerals, which ensure a rapid removal of defects.
Achieves a high luster by using a one-step process.
Working with S1 saves time.
Optimal composition.
Does not cause excessive heating of the surface and is easy to clean.

OEM #: SFWP1-055-060-51

12V/8A(17Amax.)
20L/min, 4.2 bar

• Removes deposits on boat bottoms, scum line and rust stains quickly and easily.
• Water based, environmentally friendly, biodegradable formula.
• Special patented buffering process makes this product safer than other acid based bottom cleaners.
• Safe for use on fiberglass, metal, wood and stainless steel surfaces
• Also great for removing rust stains
• Begins working on contact
• Ideal for removing marine deposits from inflatable boats and RIBs

• Large pad area makes cleaning easy and quick.
• Dual articulating connector allows pad to stay in contact with varying angled surfaces.
• Interchangeable pads for fine, medium and heavy duty cleaning and scrubbing.