BILGE PUMPS

Our best drain down levels ever as low as 10mm or 1/3’’. SEAFLO Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. Compact, horizontal or vertical mounting, with 360 Degree Discharge for easy remove and replace and leaves the bilge almost dry. Port Type 3/4" (19mm), 1" (25mm), 1 1/8" (29mm) Straight Hose barb or 3/4"(19mm) 90° Elbow together with pumps to meet different installation request. Automatic turns on and off when water rise down.

Power supply, DC: 24V / 3A
Flow rate: 4160 LPH (1100GPH)
Head: 4.0m/12.0'
Захранващ кабел: 1 м
Outlet dia.: 19 mm(3/4")+29 mm (1-1/8"); 25 mm(1")+29 mm(1-1/8"); 90° - 29 mm(1-1/8")
N.W.: 0.39 kg

SEAFLO latest automatic 2000GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.

Voltage：24V / 4 А
​Flow Rate：2000 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5.5 m
Motor：Cartridge Pump Replacement Motors(sold separately)

SEAFLO latest automatic 1500GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.

Voltage：24V / 2.5 А
​Flow Rate：1500 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5 m
Motor：Cartridge Pump Replacement Motors(sold separately)

SEAFLO latest automatic 2000GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.

Voltage：12V / 4 А
​Flow Rate：2000 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5.5 m
Motor：Cartridge Pump Replacement Motors(sold separately)

SEAFLO latest automatic 1500GPH, 2000GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.

Voltage：12V / 4.5 А
Flow Rate：1500 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5 m
Motor：Cartridge Pump Replacement Motors(sold separately)

SEAFLO latest automatic 1100GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.

Power supply, DC: 12V / 4.0A
Flow rate: 4160 LPH (1100GPH)
Head: 4.0m/12.0'
Wire lead: 1 m
Outlet dia.: 1" (25mm) / 1-1/8" (29mm)
N.W.: 0.40 kg

Our best drain down levels ever as low as 10mm or 1/3’’. SEAFLO Narrow, Low profile bilge pump fits deep down in small/awkward bilge spaces where other pumps won't fit. Compact, horizontal or vertical mounting, with 360 Degree Discharge for easy remove and replace and leaves the bilge almost dry. Port Type 3/4" (19mm), 1" (25mm), 1 1/8" (29mm) Straight Hose barb or 3/4"(19mm) 90° Elbow together with pumps to meet different installation request. Automatic turns on and off when water rise down.

Power supply, DC: 12V / 4.2A
Flow rate: 4160 LPH (1100GPH)
Head: 4.0m/12.0'
Захранващ кабел: 1 м
Outlet dia.: 19 mm(3/4")+29 mm (1-1/8"); 25 mm(1")+29 mm(1-1/8"); 90° - 29 mm(1-1/8")
N.W.: 0.39 kg

OEM #: SFBP2-G750-07

Inlet Ø: 19-24.5-28-38 mm (¾"–1"–1⅛"–1½")
334x215x112 mm