SEA-DOO/CAN-AM
Products
ANTIFOULINGS MIXED MATRIX - COPPER BASED 2.5 L, red — 160122 NTX
Marin
FOR MEDIUM
FOULING AREA
      |
► Medium matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: red
| Marin antifouling is adapted for medium fouling areas or for boats staying short time in mooring. | ||||
|---|---|---|---|---|
| Marin is recommended for small fishing boats and coastal sailings. This product has good seasonal efficiency according to the water quality of the area. |
Order request
HARD MATRIX ANTIFOULING - HIGH LEVEL OF PROTECTION — 160431 A4 YACHTING NTX
A4
HIGH STRENGTH FOR FAST POWER BOAT
SAILING FISHING, CRUISING BOATS
 |
► Hard matrix, copper-based
► 5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing:0.75 L
► Colour: blue
| Nautix A4 is a high strength antifouling selected by many professional paint applicators and boatyards. | ||||
|---|---|---|---|---|
| Nautix A4 is a reference of quality due to its application properties (with a smooth finish) associated with very good antifouling efficiency. |
Order request
A4 FORMULA+, HARD MATRIX ANTIFOULING 2.5 L — 150601 А4 NTX
A4
HIGH STRENGTH FOR FAST POWER BOAT
SAILING FISHING, CRUISING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: white
| Nautix A4 is a high strength antifouling selected by many professional paint applicators and boatyards. | ||||
|---|---|---|---|---|
| Nautix A4 is a reference of quality due to its application properties (with a smooth finish) associated with very good antifouling efficiency. |
Order request
ADHESION AND ANTICORROSION PRIMER FOR PROPELLER AND Z-DRIVE, spray 0.3 L, matalic gray — 151916 P7 NTX
P7
ADHESION AND ANTICORROSION PRIMER
FOR PROPELLER AND Z-DRIVE
   |
► Adhesion primer for A7 T.Speed antifouling
► 1.5 m2/spray
► 2 coats are recommended
► Do not apply under 10°C
► At 15°C wait 15 min. between coats
► 1 h before launching
► Cleaner: DP
► Packing: spray 0.300 ml
► Colour: metalic gray
| P7 spray primer is an adhesion and protective primer for propeller. Easy to apply, P7 can be applied directly on a new propeller or with Acralu + P7 for maintenance. |
||||
In stock
QUICK DRYING UNIVERSAL PRIMER 0.75 L, metalic gray — 151910 P1 NTX
P1
QUICK DRYING UNIVERSAL PRIMER FOR GRP
ADHESION, WOOD PREGNATION AND ANTICORROSION
   |
► 1 pot adhesion primer recommended alos as versatile undercoat for all major antifouling schemes and conversion coat for unknow antifouling
► Apply 1 coat to improve the adhesion of paint on GRP surface
► Application methods: brush, roller, spray gun
► 8.5 m2/l per coat
► Application advises:
► Adhesion: 1 coat
► Protection: 4-5 coat minimum
► For wood: thin 10-20% the first coat
► At 15°C hand dry in 45 min., overcoating after 1h30
► Thinner: DP
► Packing: 0.75 l
► Colour: metalic grey
Application of P1 Nautix primer:
|
||||
In stock
THINNER FOR PRIMERS AND TWIN-PACK ENAMELS 0.75 L — 151730 DP NTX
DP
THINNER FOR PRIMERS
AND TWIN-PACK ENAMELS
► For primer PO, IA, PA, P1, HPE, PE, Acralu
► For ultra glide paint White T.Speed
► For undercoat U2
► For enamel L2
► For vanish VA2
► For Nautix grip: two pack non skid
► Packing: 0.75 L
| DP thinner into a twin-pack product must be done after the mix of the 2 components. | ||||
In stock
THINNER FOR ANTIFOULING AND DECK GRIP 0.75 L — 151710 DA NTX
DA
THINNER FOR ANTIFOULING
AND DECK GRIP
► For antifouling
► For deck grip: one spot non skid
► For hull cleaning after AS stripper application
► Effective cleaner for spots of tar
► Packing: 0.75 L
| DA thinner for antifoulings and Deck Grip. Also very efficient for removing tar stains. | ||||
In stock
PREMIUM ANTIFOULING FOR SUPER YACHT 2.5 L, navy blue — 151471 A88 NTX
A88
PREMIUM ANTIFOULING FOR SUPER YACHT, HEAVY
FOULING AREAS AND HOT WATER CONDITIONS
 |
► Slow ablative high strength antifouling with systemic and selective preventive actions
► Suitable for all types of boats except aluminium hulls
► 8.5 m2/L per coat, 2 to 3 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Packing: 2.5 L
► Colour: navy blue
| A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailings over any type of vessel. CLR technology (controlled leaching rate) induces a long term selective, systemic, and preventive action over the largest scope of fouling. The high solid volume of Nautix A88 limits the solvent evaporation. The association of specific biocides and a controlled leaching rate of the resin results a long term action over fouling. |
Order request
PREMIUM ANTIFOULING FOR SUPER YACHT 2.5 L, black — 151431 A88 NTX
A88
PREMIUM ANTIFOULING FOR SUPER YACHT, HEAVY
FOULING AREAS AND HOT WATER CONDITIONS
|
► Slow ablative high strength antifouling with systemic and selective preventive actions
► Suitable for all types of boats except aluminium hulls
► 8.5 m2/L per coat, 2 to 3 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Packing: 2.5 L
► Colour: black
| A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailings over any type of vessel. CLR technology (controlled leaching rate) induces a long term selective, systemic, and preventive action over the largest scope of fouling. The high solid volume of Nautix A88 limits the solvent evaporation. The association of specific biocides and a controlled leaching rate of the resin results a long term action over fouling. |
In stock
A7T.SPEED , HARD MATRIX ANTIFOULING, DESIGNED TO APPLY TO QUEUES AND PROPELLERS, spray 500 ml, grey — 151051 А7 NTX
A7 T.speed
HARD MATRIX
ANTIFOULING
 |
► 2 m2/spray, 5 to 6 coats are recommended
► At 15°C - wait ¼ h between coats
► 3 h before launching
► Packing: 0.5 L
► Colour: grey
| A7 T.Speed antifouling can be applied on protected aluminium engine drive legs and propellers. The hardy spray allows easy application (painting areas of the give leg which, are difficult to reach with a brush). You can apply A7 T.Speed directly on top of the original coating of the engine provided that surface has been degreased and sanded. On bare aluminium applay first one coat of Acralu before PA or P7 primer and then antifouling. | ||||
In stock
