SEA-DOO/CAN-AM
Products
DIAPHRAGM PUMP 12V SERIE 33 — SFDP103004533
| STANDARD PUMP CONFIGURATIONS | |
| Model | SFDP1-030-045-33 |
| Voltage | 12V |
| Open Flow (GPM/LPM） | 3.0 / 11.3 |
| Control Type | Switch |
| Max Draw | 8.0A |
| Shut-off Pressure (PSI/BAR) | 45 / 3.1 |
| Valves | EPDM |
| Diaphragm | Santoprene |
| Ports | 1/2"-14 MNPT |
| Wire Connections | 2-Pin/Leads |
| PUMP | |
| Type | 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry |
| Control Type | Pressure switch |
| Max Recommended Temperature | 60° C（140° F） |
| Priming Capabilities | 6 feet (1.8 m) suction lift |
| Re-start Pressure | Shut-off Pressure 45 PSI : 35 PSI ±5 PSI (±0.3 bar) |
| Inlet/Outlet Ports | 1/2"-14 MNPT |
| Weight | 4.2 lbs (1.9 kg) |
| MOTOR | |
| Leads | 16 AWG, 13" (33 cm) long with 2-Pin connector / Leads |
| Duty Cycle | Intermittent |
| Max.Amp Draw | 8.0 A |
| Fuse | 12.0 A |
In stock
BILGE PUMP S13A 24V 3700 GPH — SFBP2G370013A
SEAFLO 24V Electric Marine Submersible non-automatic 2000 GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all.
In stock
DIAPHRAGM PUMP 12V SERIE 52 — SFDP104006052
| STANDARD PUMP CONFIGURATIONS | |
| Model | SFDP1-040-060-52 |
| Voltage | 12V |
| Open Flow（GPM/LPM） | 4.0 / 15.0 |
| Control Type | Switch |
| Max Draw | 13.0A |
| Shut-off Pressure（PSI/BAR) | 60 / 4.2 |
| Valves | EPDM |
| Diaphragm | Santoprene |
| Ports | QUICK ATTACH |
| Wire Connections | 2-Pin/Leads |
| PUMP | |
| Type | 5 Chamber positive displacement diaphragm pump, self priming, capable of being run dry |
| Control Type | Pressure switch |
| Max Recommended Temperature | 60° C（140° F） |
| Priming Capabilities | 6 feet (1.8 m) suction lift |
| Re-start Pressure | Shut-off Pressure 60 PSI ：48 PSI ±5 PSI (±0.3 bar) |
| Shut-off Pressure 70 PSI ：56 PSI ±5 PSI (±0.3 bar) | |
| Inlet/Outlet Ports | QUICK ATTACH |
| Weight | 5.9 lbs (2.7 kg) |
| MOTOR | |
| Leads | 14 AWG, 13" (33 cm) long with 2-Pin connector / Leads |
| Duty Cycle | Continuous |
| Max.Amp Draw | 18.0 A |
| Fuse | 27.0 A |
In stock
BILGE PUMP AUTO S13B 24V 2000 GPH — SFBP2G200013B
SEAFLO latest automatic 2000GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.
Voltage：24V / 4 А
Flow Rate：2000 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5.5 m
Motor：Cartridge Pump Replacement Motors(sold separately)
In stock
BILGE PUMP AUTO S13B 24V 1500 GPH — SFBP2G150013B
SEAFLO latest automatic 1500GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.
Voltage：24V / 2.5 А
Flow Rate：1500 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5 m
Motor：Cartridge Pump Replacement Motors(sold separately)
In stock
BILGE PUMP S13A 24V 1500 GPH — SFBP2G150013A
SEAFLO 24V Electric Marine Submersible non-automatic 1500 GPH bilge pumps offer water evacuation activated by a panel or float switch. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all.
Flow rate: 1500 GPH
Volts: 24V / 2.5A
Head: 5 m
Outlet Dia.: 1-1/8" (29 mm)
In stock
BILGE PUMP AUTO S13B 12V 2000 GPH — SFBP1G200013B
SEAFLO latest automatic 2000GPH bilge pumps offer water evacuation without extra float switch needed. SEAFLO electronic sensing series bilge pumps turn the pump impeller every 2-1/2 minutes for approximately 0.5 second. If water is present, the pump will sense resistance and will continue to run until all water is removed. This system is a compact way of constantly sensing for water presence. New innovative split quick-connect joint design removes and installs in seconds! Change pump never been so easy. No need to disconnect base or plumbing when replacing pump, which can meet the needs of most users. Just replace the motor that is all. Include Anti-Airlock protection and exclusive moisture tight seals, marine grade blocked wiring. Our larger impeller design and more robust motor allow us to outperform our competitors. Pumps offer a choice of straight or 90 degree ports to suit your installation.
Voltage：12V / 4 А
Flow Rate：2000 GPH
Outlet Dia：1-1/8" (29mm)
Application Scenarios：Marine
Head: 5.5 m
Motor：Cartridge Pump Replacement Motors(sold separately)
In stock
PRESSURE PUPMP 24V 5.6 LPM/1.5GPM, 40PSI/2 — SFDP201504023A
SEAFLO 23 Series (IP57) diaphragm pump is design for wider applications of liquid transfer, pressurization and circulation. 23 Series is compact design but flow rate is up to 1.5GPM (5.6LPM), and pressure is up to 120PSI (8.2Bar). 23 Series supports flexible customization. Firstly its control type can choose from demand, by pass, no switch, manual switch and any combination of these types. Secondly, with compatible fixtures, 23 series can easy connect to any industrial port. Thirdly, 23 series can be customized to use for water, chemicals and food grade.
Voltage：24V/2.5A
Open Flow：0.5-1.5GPM / 1.9-5.6LPM
Shut-off Pressure：40-70PSI / 2.8-4.8BAR
Priming Capabilities：5 feet (1.5 m) suction lift
Max Recommended Temperature：140° F (60° C）Max.
Material：EPDM(Valves) / Santoprene(Diaphragm)
Ports：5/8" quick attach
In stock
