SEALINE

Product description "Multifunctional 2k spray epoxy primer"

• Multifunctional two components epoxy primer in spray can
• Simple activating system for two components mixing
• Comfortable long potlife - 48 hours since activating
• Professional and easy spray application without having a compressor and spray gun
• Does not need additional tools for application
• Multifunctional epoxy primer for grounding, filling or intercoating
• Recommended above and below water line
• Provides antiosmotic protection in 250 pm.
• Anticorrosive protection
• Does not drip from vertical surfaces
• First layer: raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
• Second layer: epoxy primer, polyurethane topcoat, clear coat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval

SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.

• Category: production, care and maintenance
• Surface: laminate, wood, steel
• Area: below waterline
• Color: grey, red, navy blue, black, green
• Theoretical coverage: 8-9 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: easy application, fast drying time

SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.

• Category: production, care and maintenance
• Surface: laminate, wood, steel
• Area: below waterline
• Color: grey, red, navy blue, black, green
• Theoretical coverage: 8-9 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: easy application, fast drying time

PRODUCT DISCRIPTION :
NEW Gelcoat Filler is very fast hard and easy in use.

• Hardener is a paste
• Recommended for filling minor scratches and splinters in gelcoat
• Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
• Adapted to work in an environment with high humidity
• Creates a protective coating for water and the impact of UV radiation
• After curing provides a high gloss, hard, clean and shiny surface
• Resistant to prolonged exposure to even very polluted environment
• When dry, does not remain sticky

Sea-Line S1 preffesional Marine polishing paste is a very effective polishing paste. Does not contain silicone.
Recommended for polishing gelcoat surfaces, manufacturing composites, and topcoats. S1 quickly removes scratches and defects after sanding, guaranteeing an ideal surface. Includes high-quality polishing minerals, which ensure a rapid removal of defects.
Achieves a high luster by using a one-step process.
Working with S1 saves time.
Optimal composition.
Does not cause excessive heating of the surface and is easy to clean.

• All pollution due to precipitation
• Greasy, difficult to remove stains and dirt
• Residues of damaged protective coatings (including waxes) which must be removed before applying new layer of protective coating
• Does not leave streaks

• After polishing: wash surfaces with use S3 gives you opportunity to check the quality of the obtained coating, if it is polished well we get a perfect look. It perfectly removes all traces of abrasives, haze, etc.
• At the final stage: because of fast cleaning dirt from surface which is a result from the production processes and easy in use, working time necessary for preparing elements before shipping is much shorter.

• 2-component epoxy anti-corrosive primer.
• Recommended for priming steel and aluminum.
• Excellent substrate protection against corrosion.
• Provides very good adhesion.
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room for mixing them.
• First layer: Raw surface, epoxy or polyester filler, epoxy primers
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval

LAMB`S WOOL POLISHING PADS „MM” TYPE

Type „MM” polishing pads is meant for polishing of gelcoats, tool gelcoats, paints, varnishes, plexi and polycarbonates.
The polishing pads is made of 100% natural lamb wool.

POLISHING WOOLS

The polishing pads are made for polishing gelcoats, tool gelcoats, paints, PU varnishes, plexi and polycarbonates.
The polishing pads are made of 100% natural wool.