SEALINE

Made from the natural lamb wool (100%) of the fleece long-guests 4mm is the perfect tool for the application of polyurethane lacquers and enamels, epoxy primers and antifouling. Unilateral rounded finish with a unique welded seam can operate in difficult and inaccessible places.

Non skid powder is anadditive for polyurethane topcoats.
Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats.
Add powder to the mixture, mix well and wait 15 minutes.
Apply with a short-haired roller. During application, paint must be mixed often

Thinner for Polyurethan 2K provide appropriate application parameters such as flow, pot life and drying time. Adequate thinning level enables for different application methods.

Thinner for Polyurethan 2K provide appropriate application parameters such as flow, pot life and drying time. Adequate thinning level enables for different application methods.

Thinner for 2K epoxy primer ensure adequate application parameters such as flow, pot life and drying time. An appropriate thinning level allows for different application methods: brush, roll, spray gun.

Thinner for 2K epoxy primer ensure adequate application parameters such as flow, pot life and drying time. An appropriate thinning level allows for different application methods: brush, roll, spray gun.

GELCOAT FILLER DRY FAST is a combination of fast hardening time, self-leveling properties, high gloss finish. Filler does not drip from vertical surfaces. The main usage is for quick repair of small gelcoat damages.

• The product is resistant to UV.
• Category: repair
• Surface: gelcoat (polyester laminate)
• Area: above waterline
• Color: white 9001, cream 9010
• Application: putty knife
• Pot life: 6 - 7 minutes
• Hardening time: 4 hours in temp. 20°C
• Advantages: easy application, quick repair, UV resistance, after curing provides a high gloss, hard, clean and shiny surface

Filler reinforced with fiberglass designated for repairing deep damages and gluing of elements.

• Category: production,repair
• Surface: epoxy and polyester laminate, wood, steel, aluminum
• Area: above and below waterline
• Color: light grey
• Application: putty knife
• Pot life: 40 minutes
• Hardening time: 16 hours in temp. 20°C
• Advantages: after grinding the surface does not need any finishing fillers