SEA-DOO/CAN-AM
AIR HORN 12V — GS12042
Electropneumatic air horm with reduced dimensions but high sound output. Plastic ABS trumpet. Complete with electric compresor and fixing hardware.
12V/16A
F=420 Hz, 116 dB (1 m)
L=250 mm
In stock
AIR HORN 12V — GS12040
Twin tone air horn with plastic chromed trumpets.
Complete with electric compresor and fixing hardware.
12V/18A
F=326/412 Hz, 111 dB (1 m)
L=310/390 mm
In stock
ADHESION AND ANTICORROSION PRIMER FOR PROPELLER AND Z-DRIVE, spray 0.3 L, matalic gray — 151916 P7 NTX
P7
ADHESION AND ANTICORROSION PRIMER
FOR PROPELLER AND Z-DRIVE
      |
► Adhesion primer for A7 T.Speed antifouling
► 1.5 m2/spray
► 2 coats are recommended
► Do not apply under 10°C
► At 15°C wait 15 min. between coats
► 1 h before launching
► Cleaner: DP
► Packing: spray 0.300 ml
► Colour: metalic gray
| P7 spray primer is an adhesion and protective primer for propeller. Easy to apply, P7 can be applied directly on a new propeller or with Acralu + P7 for maintenance. |
||||
In stock
QUICK DRYING UNIVERSAL PRIMER 0.75 L, metalic gray — 151910 P1 NTX
P1
QUICK DRYING UNIVERSAL PRIMER FOR GRP
ADHESION, WOOD PREGNATION AND ANTICORROSION
   |
► 1 pot adhesion primer recommended alos as versatile undercoat for all major antifouling schemes and conversion coat for unknow antifouling
► Apply 1 coat to improve the adhesion of paint on GRP surface
► Application methods: brush, roller, spray gun
► 8.5 m2/l per coat
► Application advises:
► Adhesion: 1 coat
► Protection: 4-5 coat minimum
► For wood: thin 10-20% the first coat
► At 15°C hand dry in 45 min., overcoating after 1h30
► Thinner: DP
► Packing: 0.75 l
► Colour: metalic grey
Application of P1 Nautix primer:
|
||||
In stock
THINNER FOR PRIMERS AND TWIN-PACK ENAMELS 0.75 L — 151730 DP NTX
DP
THINNER FOR PRIMERS
AND TWIN-PACK ENAMELS
► For primer PO, IA, PA, P1, HPE, PE, Acralu
► For ultra glide paint White T.Speed
► For undercoat U2
► For enamel L2
► For vanish VA2
► For Nautix grip: two pack non skid
► Packing: 0.75 L
| DP thinner into a twin-pack product must be done after the mix of the 2 components. | ||||
In stock
THINNER FOR ANTIFOULING AND DECK GRIP 0.75 L — 151710 DA NTX
DA
THINNER FOR ANTIFOULING
AND DECK GRIP
► For antifouling
► For deck grip: one spot non skid
► For hull cleaning after AS stripper application
► Effective cleaner for spots of tar
► Packing: 0.75 L
| DA thinner for antifoulings and Deck Grip. Also very efficient for removing tar stains. | ||||
In stock
PREMIUM ANTIFOULING FOR SUPER YACHT 2.5 L, navy blue — 151471 A88 NTX
A88
PREMIUM ANTIFOULING FOR SUPER YACHT, HEAVY
FOULING AREAS AND HOT WATER CONDITIONS
   |
► Slow ablative high strength antifouling with systemic and selective preventive actions
► Suitable for all types of boats except aluminium hulls
► 8.5 m2/L per coat, 2 to 3 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Packing: 2.5 L
► Colour: navy blue
| A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailings over any type of vessel. CLR technology (controlled leaching rate) induces a long term selective, systemic, and preventive action over the largest scope of fouling. The high solid volume of Nautix A88 limits the solvent evaporation. The association of specific biocides and a controlled leaching rate of the resin results a long term action over fouling. |
In stock
