SEA-DOO/CAN-AM
PAINTS
ANTIFOULINGS MIXED MATRIX - COPPER BASED 2.5 L, blue — 160132 NTX
Marin
FOR MEDIUM
FOULING AREA
      |
► Medium matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: blue
| Marin antifouling is adapted for medium fouling areas or for boats staying short time in mooring. | ||||
|---|---|---|---|---|
| Marin is recommended for small fishing boats and coastal sailings. This product has good seasonal efficiency according to the water quality of the area. |
In stock
EPOXY PRIMER IN AEROSOL — 38758 SeaLine
Product description "Multifunctional 2k spray epoxy primer"
- Multifunctional two components epoxy primer in spray can
- Simple activating system for two components mixing
- Comfortable long potlife - 48 hours since activating
- Professional and easy spray application without having a compressor and spray gun
- Does not need additional tools for application
- Multifunctional epoxy primer for grounding, filling or intercoating
- Recommended above and below water line
- Provides antiosmotic protection in 250 pm.
- Anticorrosive protection
- Does not drip from vertical surfaces
- First layer: raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
- Second layer: epoxy primer, polyurethane topcoat, clear coat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval
In stock
GELCOAT FILLER “DRY FAST” /white/, 100 ml — 14316 SeaLine
PRODUCT DISCRIPTION :
NEW Gelcoat Filler is very fast hard and easy in use.
- Hardener is a paste
- Recommended for filling minor scratches and splinters in gelcoat
- Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
- Adapted to work in an environment with high humidity
- Creates a protective coating for water and the impact of UV radiation
- After curing provides a high gloss, hard, clean and shiny surface
- Resistant to prolonged exposure to even very polluted environment
- When dry, does not remain sticky
In stock
POLISHING LAMB WOOL D (YELLOW) 180 mm — 35555 SeaLine
LAMB`S WOOL POLISHING PADS „D” TYPE
There are available type „D” pads in yellow color and bigger cutting power.
In stock
POLISHING LAMB WOOL D (YELLOW) 150 mm — 35556 SeaLine
LAMB`S WOOL POLISHING PADS „D” TYPE
There are available type „D” pads in yellow color and bigger cutting power.
In stock
ROLL /lamb wool/ — 36826 SeaLine
Made from the natural lamb wool (100%) of the fleece long-guests 4mm is the perfect tool for the application of polyurethane lacquers and enamels, epoxy primers and antifouling. Unilateral rounded finish with a unique welded seam can operate in difficult and inaccessible places.
In stock
ROLL /lamb wool/ — 36824 SeaLine
Made from the natural lamb wool (100%) of the fleece long-guests 4mm is the perfect tool for the application of polyurethane lacquers and enamels, epoxy primers and antifouling. Unilateral rounded finish with a unique welded seam can operate in difficult and inaccessible places.
In stock