PAINTS

2-component topcoat high gloss paint. It protects the surface against water, maritime atmosphere, scratches and color change under the influence of UV rays. Is characte rized by high coating strength.

• Category: production, repair
• Surface: laminates, wood, steel ,aluminum
• Area: above waterline, optionaly below waterline
• Color: white, ecru, red, navy blue, blue, green, grey, black
• Theoretical coverage: 13-14 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Pot life: 3 hours
• Touch dry: 6-8 hours in temp. 20°C
• Advantages: damage resistant, permanent color, high gloss finish

1-component chlorinated rubber primer, recommended as a layer increasing adhesiveness to the surface for all 1K Sea-Line paints and varnishes as a barrier surface, used directly on an old anti-fouling paint layer.

• Category: production, repair
• Surface: laminates, steel, wood, porous
• surfaces
• Area: above and below waterline
• Color: grey
• Theoretical coverage:
• 7 m²/l for 65µm DTF
• Application: brush, roll, spray gun
• Touch dry: 4hours in temp. 20°C
• Advantages: separating layer, reinforcing
• the structure of the substrate

2-component primer for universal use. It’s basic functions are protection, adhesion increase, interlayer function and antiosmosis protection. Can be used as a filling or finishing primer.

• Category: production, repair
• Surface: laminates, wood, aluminum
• Area: above and below waterline
• Color: white, grey
• Theoretical coverage: 10-11 m²/l for 60µm DTF
• Application: brush, roll, spray gun
• Pot life: 2hours
• Touch dry: 4hours in temp. 20°C
• Advantages: easy in applying and grinding, multifunctional purpose

A HIGH SOLID type 2-component primer which does not include a solvents. Product designated for fixing laminate damages that occurred due to osmosis or for antyosmosis protection.

• Category: production, repair
• Surface: laminates
• Area: above and below waterline
• Color: grey
• Theoretical coverage: 6-7 m²/l for 150µm DTF
• Application: brush, roll, spray gun
• Pot life: 45 minutes
• Touch dry: 10-12hours in temp. 20°C
• Advantages: does not contain solvents, forms a hard coating that is resistant to water

Filler reinforced with fiberglass designated for repairing deep damages and gluing of elements.

• Category: production,repair
• Surface: epoxy and polyester laminate, wood, steel, aluminum
• Area: above and below waterline
• Color: light grey
• Application: putty knife
• Pot life: 40 minutes
• Hardening time: 16 hours in temp. 20°C
• Advantages: after grinding the surface does not need any finishing fillers

Filler designated for quick repairs of minor damage, cracks and scratches.
Category: production,repair
Surface: epoxy and polyester laminate, wood, steel, aluminum
Area: above and below waterline
Color: white
Application: putty knife
Pot life: 40 minutes
Hardening time: 15 hours in temp. 20°C
Advantages: multifunctional

MS POLYMER is an elastic adhesive and sealing mass designated for different types of materials in various combinations, without the need of priming. Modern application system enables quick and precise dosing without the need of using any additional tools. The dosing system prevents from self-hardening of the mass during storage.

• Category: production, repair
• Surface: laminates, wood, glass, metal, aluminum, plastics, painted surfaces
• Area: above and below waterline
• Color: white, black, transparent
• Advantages: resistant to UV and water, possibility painting with any paint system

MS POLYMER is an elastic adhesive and sealing mass designated for different types of materials in various combinations, without the need of priming. Modern application system enables quick and precise dosing without the need of using any additional tools. The dosing system prevents from self-hardening of the mass during storage.

• Category: production, repair
• Surface: laminates, wood, glass, metal, aluminum, plastics, painted surfaces
• Area: above and below waterline
• Color: white, black, transparent
• Advantages: resistant to UV and water, possibility painting with any paint system

MS POLYMER is an elastic adhesive and sealing mass designated for different types of materials in various combinations, without the need of priming. Modern application system enables quick and precise dosing without the need of using any additional tools. The dosing system prevents from self-hardening of the mass during storage.

• Category: production, repair
• Surface: laminates, wood, glass, metal, aluminum, plastics, painted surfaces
• Area: above and below waterline
• Color: white, black, transparent
• Advantages: resistant to UV and water, possibility painting with any paint system

Epoxy resin for laminating, gluing structural elements and repairs of all kinds of surface. Long pot life of the mixture allows for a good soaking of the glass filling, without the resin dripping from vertical surfaces.

• Category: production, repair
• Surface: epoxy and polyester laminate, wood, steel, aluminum
• Area: above and below waterline
• Color: components A and B are colorless
• Pot life: 45 minutes
• Hardening time: 7 hours in temp. 23°C
• Advantages: simple mixing ratio: 2:1 by volume