PAINTS

LAMB`S WOOL POLISHING PADS „MM” TYPE

Type „MM” polishing pads is meant for polishing of gelcoats, tool gelcoats, paints, varnishes, plexi and polycarbonates.
The polishing pads is made of 100% natural lamb wool.

POLISHING WOOLS

The polishing pads are made for polishing gelcoats, tool gelcoats, paints, PU varnishes, plexi and polycarbonates.
The polishing pads are made of 100% natural wool.

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

Transparent 1K (1-component) varnish dedicated for wooden boats and yachts. Yacht Varnish is characterized by great flow, UV rays resistance and high gloss.

• Category: production, repair
• Surface: wood, paints and varnishes
• Area: above waterline, interior
• Theoretical coverage: 12-13 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Touch dry: 3 hours in temp. 20°C
• Advantages: easy application, enables quick repair

1-component chlorinated rubber primer, recommended as a layer increasing adhesiveness to the surface for all 1K Sea-Line paints and varnishes as a barrier surface, used directly on an old anti-fouling paint layer.

• Category: production, repair
• Surface: laminates, steel, wood, porous
• surfaces
• Area: above and below waterline
• Color: grey
• Theoretical coverage:
• 7 m²/l for 65µm DTF
• Application: brush, roll, spray gun
• Touch dry: 4hours in temp. 20°C
• Advantages: separating layer, reinforcing
• the structure of the substrate

GELCOAT FILLER DRY FAST is a combination of fast hardening time, self-leveling properties, high gloss finish. Filler does not drip from vertical surfaces. The main usage is for quick repair of small gelcoat damages.

• The product is resistant to UV.
• Category: repair
• Surface: gelcoat (polyester laminate)
• Area: above waterline
• Color: white 9001, cream 9010
• Application: putty knife
• Pot life: 6 - 7 minutes
• Hardening time: 4 hours in temp. 20°C
• Advantages: easy application, quick repair, UV resistance, after curing provides a high gloss, hard, clean and shiny surface

Marin
FOR MEDIUM
FOULING AREA

 ►  Medium matrix, copper-based
 ►  12.5 m²/L per coat
 ►  2 coats are recommended
 ►  At 15°C: wait 3 h between coats
 ►  3 h before launching
 ►  Thinner: DA
 ►  Recommended primers:
 ►  Adhesion: P1, PO или PE
 ►  Protection: PO, PE или HPE (2 coats)
 ►  Osmosis prevention: PO или HPE (5 coats)
 ►  Anticorrosion: PA (3 coats minimum)
 ►  Classic wood: P1
 ►  Packing: 2.5 L
 ►  Colour: blue

40x40 cm
Pvc coated cloth, with wrap-around back.
Supplied with 2 pockets and a storage pocket.