SEA-DOO/CAN-AM
PAINTS
ANTIFOULINGS MIXED MATRIX - COPPER BASED 2.5 L, blue — 160132 NTX
Marin
FOR MEDIUM
FOULING AREA
      |
► Medium matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: blue
| Marin antifouling is adapted for medium fouling areas or for boats staying short time in mooring. | ||||
|---|---|---|---|---|
| Marin is recommended for small fishing boats and coastal sailings. This product has good seasonal efficiency according to the water quality of the area. |
In stock
ANTIFOULINGS MIXED MATRIX - COPPER BASED 2.5 L, red — 160122 NTX
Marin
FOR MEDIUM
FOULING AREA
|
► Medium matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: red
| Marin antifouling is adapted for medium fouling areas or for boats staying short time in mooring. | ||||
|---|---|---|---|---|
| Marin is recommended for small fishing boats and coastal sailings. This product has good seasonal efficiency according to the water quality of the area. |
Order request
HARD MATRIX ANTIFOULING - HIGH LEVEL OF PROTECTION — 160431 A4 YACHTING NTX
A4
HIGH STRENGTH FOR FAST POWER BOAT
SAILING FISHING, CRUISING BOATS
 |
► Hard matrix, copper-based
► 5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing:0.75 L
► Colour: blue
| Nautix A4 is a high strength antifouling selected by many professional paint applicators and boatyards. | ||||
|---|---|---|---|---|
| Nautix A4 is a reference of quality due to its application properties (with a smooth finish) associated with very good antifouling efficiency. |
Order request
EPOXY PRIMER IN AEROSOL — 38758 SeaLine
Product description "Multifunctional 2k spray epoxy primer"
- Multifunctional two components epoxy primer in spray can
- Simple activating system for two components mixing
- Comfortable long potlife - 48 hours since activating
- Professional and easy spray application without having a compressor and spray gun
- Does not need additional tools for application
- Multifunctional epoxy primer for grounding, filling or intercoating
- Recommended above and below water line
- Provides antiosmotic protection in 250 pm.
- Anticorrosive protection
- Does not drip from vertical surfaces
- First layer: raw surface, epoxy or polyester filler, epoxy primers, paint cleaned prior.
- Second layer: epoxy primer, polyurethane topcoat, clear coat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval
In stock
FLOATING LINE WITH THREE STRIPS /blue/ — E5650000 TREM
Floating lines equipped with a permanent adhesive which makes the line similar to a painted one.
45 mm / 10 m
Order request
SELF-POLISHING ANTIFOULING /grey/ — 35599 SeaLine
SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.
- Category: production, care and maintenance
- Surface: laminate, wood, steel
- Area: below waterline
- Color: grey, red, navy blue, black, green
- Theoretical coverage: 8-9 m²/l for 50µm DTF
- Application: brush, roll
- Touch dry: 1 hour
- Launching time: minimum 12 hours after painting
- Advantages: easy application, fast drying time
In stock
SELF-POLISHING ANTIFOULING /grey/ — 35477 SeaLine
SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.
- Category: production, care and maintenance
- Surface: laminate, wood, steel
- Area: below waterline
- Color: grey, red, navy blue, black, green
- Theoretical coverage: 8-9 m²/l for 50µm DTF
- Application: brush, roll
- Touch dry: 1 hour
- Launching time: minimum 12 hours after painting
- Advantages: easy application, fast drying time
In stock
GELCOAT FILLER “DRY FAST” /white/, 100 ml — 14316 SeaLine
PRODUCT DISCRIPTION :
NEW Gelcoat Filler is very fast hard and easy in use.
- Hardener is a paste
- Recommended for filling minor scratches and splinters in gelcoat
- Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
- Adapted to work in an environment with high humidity
- Creates a protective coating for water and the impact of UV radiation
- After curing provides a high gloss, hard, clean and shiny surface
- Resistant to prolonged exposure to even very polluted environment
- When dry, does not remain sticky
In stock
EPOXY PRIMER 4:1 ANTICORROSION — 5076 SeaLine
- 2-component epoxy anti-corrosive primer.
- Recommended for priming steel and aluminum.
- Excellent substrate protection against corrosion.
- Provides very good adhesion.
- Good flow gives a perfect finish.
- Easy to mix and apply.
- Caution: do not drip onto vertical surfaces.
- Cans contain components and room for mixing them.
- First layer: Raw surface, epoxy or polyester filler, epoxy primers
- Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval
Order request
