PAINTS

Thinner for 2K epoxy primer ensure adequate application parameters such as flow, pot life and drying time. An appropriate thinning level allows for different application methods: brush, roll, spray gun.

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

Transparent 1K (1-component) varnish dedicated for wooden boats and yachts. Yacht Varnish is characterized by great flow, UV rays resistance and high gloss.

• Category: production, repair
• Surface: wood, paints and varnishes
• Area: above waterline, interior
• Theoretical coverage: 12-13 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Touch dry: 3 hours in temp. 20°C
• Advantages: easy application, enables quick repair

2-component topcoat high gloss paint. It protects the surface against water, maritime atmosphere, scratches and color change under the influence of UV rays. Is characte rized by high coating strength.

• Category: production, repair
• Surface: laminates, wood, steel ,aluminum
• Area: above waterline, optionaly below waterline
• Color: white, ecru, red, navy blue, blue, green, grey, black
• Theoretical coverage: 13-14 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Pot life: 3 hours
• Touch dry: 6-8 hours in temp. 20°C
• Advantages: damage resistant, permanent color, high gloss finish

2-component topcoat high gloss paint. It protects the surface against water, maritime atmosphere, scratches and color change under the influence of UV rays. Is characte rized by high coating strength.

• Category: production, repair
• Surface: laminates, wood, steel ,aluminum
• Area: above waterline, optionaly below waterline
• Color: white, ecru, red, navy blue, blue, green, grey, black
• Theoretical coverage: 13-14 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Pot life: 3 hours
• Touch dry: 6-8 hours in temp. 20°C
• Advantages: damage resistant, permanent color, high gloss finish

1-component chlorinated rubber primer, recommended as a layer increasing adhesiveness to the surface for all 1K Sea-Line paints and varnishes as a barrier surface, used directly on an old anti-fouling paint layer.

• Category: production, repair
• Surface: laminates, steel, wood, porous
• surfaces
• Area: above and below waterline
• Color: grey
• Theoretical coverage:
• 7 m²/l for 65µm DTF
• Application: brush, roll, spray gun
• Touch dry: 4hours in temp. 20°C
• Advantages: separating layer, reinforcing
• the structure of the substrate

1-component chlorinated rubber primer, recommended as a layer increasing adhesiveness to the surface for all 1K Sea-Line paints and varnishes as a barrier surface, used directly on an old anti-fouling paint layer.

• Category: production, repair
• Surface: laminates, steel, wood, porous
• surfaces
• Area: above and below waterline
• Color: grey
• Theoretical coverage:
• 7 m²/l for 65µm DTF
• Application: brush, roll, spray gun
• Touch dry: 4hours in temp. 20°C
• Advantages: separating layer, reinforcing
• the structure of the substrate

2-component primer for universal use. It’s basic functions are protection, adhesion increase, interlayer function and antiosmosis protection. Can be used as a filling or finishing primer.

• Category: production, repair
• Surface: laminates, wood, aluminum
• Area: above and below waterline
• Color: white, grey
• Theoretical coverage: 10-11 m²/l for 60µm DTF
• Application: brush, roll, spray gun
• Pot life: 2hours
• Touch dry: 4hours in temp. 20°C
• Advantages: easy in applying and grinding, multifunctional purpose

A HIGH SOLID type 2-component primer which does not include a solvents. Product designated for fixing laminate damages that occurred due to osmosis or for antyosmosis protection.

• Category: production, repair
• Surface: laminates
• Area: above and below waterline
• Color: grey
• Theoretical coverage: 6-7 m²/l for 150µm DTF
• Application: brush, roll, spray gun
• Pot life: 45 minutes
• Touch dry: 10-12hours in temp. 20°C
• Advantages: does not contain solvents, forms a hard coating that is resistant to water