SEA-DOO/CAN-AM
PROMOTIONS
PAINTS
SELF-POLISHING ANTIFOULING /navy blue/ — 35602 SeaLine
SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.
- Category: production, care and maintenance
- Surface: laminate, wood, steel
- Area: below waterline
- Color: grey, red, navy blue, black, green
- Theoretical coverage: 8-9 m²/l for 50µm DTF
- Application: brush, roll
- Touch dry: 1 hour
- Launching time: minimum 12 hours after painting
- Advantages: easy application, fast drying time
In stock
BOSUN`S CHAIR “LIFT UP“ — B1000950 TREM
40x40 cm
Pvc coated cloth, with wrap-around back.
Supplied with 2 pockets and a storage pocket.
Order request
BOSUN`S CHAIR “SAILING“ — B1000900 TREM
44x43 cm ext.
Seat - 40x20 cm
In stock
EPOXY PRIMER 4:1 ANTICORROSION — 5076 SeaLine
- 2-component epoxy anti-corrosive primer.
- Recommended for priming steel and aluminum.
- Excellent substrate protection against corrosion.
- Provides very good adhesion.
- Good flow gives a perfect finish.
- Easy to mix and apply.
- Caution: do not drip onto vertical surfaces.
- Cans contain components and room for mixing them.
- First layer: Raw surface, epoxy or polyester filler, epoxy primers
- Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
- Does not require sanding between coats while maintaining the suggested time interval
In stock
POLISHING LAMB WOOL D (YELLOW) 180 mm — 35555 SeaLine
LAMB`S WOOL POLISHING PADS „D” TYPE
There are available type „D” pads in yellow color and bigger cutting power.
In stock
NON SKID POWDER — 35474 SeaLine
Non skid powder is anadditive for polyurethane topcoats.
Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats.
Add powder to the mixture, mix well and wait 15 minutes.
Apply with a short-haired roller. During application, paint must be mixed often
In stock
THINNER FOR POLYURETHAN 2K PAINT /spray/ — 5747 SeaLine
Thinner for Polyurethan 2K provide appropriate application parameters such as flow, pot life and drying time. Adequate thinning level enables for different application methods.
In stock
THINNERS FOR 2 K PRIMERS — 5138 SeaLine
Thinner for 2K epoxy primer ensure adequate application parameters such as flow, pot life and drying time. An appropriate thinning level allows for different application methods: brush, roll, spray gun.
In stock
THINNERS FOR 2 K PRIMERS — 11278 SeaLine
Thinner for 2K epoxy primer ensure adequate application parameters such as flow, pot life and drying time. An appropriate thinning level allows for different application methods: brush, roll, spray gun.
In stock
