SEA-DOO/CAN-AM
PAINTS
ANTIFOULINGS MIXED MATRIX - COPPER BASED 2.5 L, navy blue — 151141 MARIN NTX
Marin
FOR MEDIUM
FOULING AREA
      |
► Medium matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: navy blue
| Marin antifouling is adapted for medium fouling areas or for boats staying short time in mooring. | ||||
|---|---|---|---|---|
| Marin is recommended for small fishing boats and coastal sailings. This product has good seasonal efficiency according to the water quality of the area. |
Order request
A7T.SPEED , HARD MATRIX ANTIFOULING, DESIGNED TO APPLY TO QUEUES AND PROPELLERS, spray 500 ml, grey — 151051 А7 NTX
A7 T.speed
HARD MATRIX
ANTIFOULING
   |
► 2 m2/spray, 5 to 6 coats are recommended
► At 15°C - wait ¼ h between coats
► 3 h before launching
► Packing: 0.5 L
► Colour: grey
| A7 T.Speed antifouling can be applied on protected aluminium engine drive legs and propellers. The hardy spray allows easy application (painting areas of the give leg which, are difficult to reach with a brush). You can apply A7 T.Speed directly on top of the original coating of the engine provided that surface has been degreased and sanded. On bare aluminium applay first one coat of Acralu before PA or P7 primer and then antifouling. | ||||
In stock
A7T.SPEED , HARD MATRIX ANTIFOULING, DESIGNED TO APPLY TO QUEUES AND PROPELLERS, spray 500 ml, black — 151050 А7 NTX
A7 T.speed
HARD MATRIX
ANTIFOULING
|
► 2 m2/spray, 5 to 6 coats are recommended
► At 15°C - wait ¼ h between coats
► 3 h before launching
► Packing: 0.5 L
► Colour: black
| A7 T.Speed antifouling can be applied on protected aluminium engine drive legs and propellers. The hardy spray allows easy application (painting areas of the give leg which, are difficult to reach with a brush). You can apply A7 T.Speed directly on top of the original coating of the engine provided that surface has been degreased and sanded. On bare aluminium applay first one coat of Acralu before PA or P7 primer and then antifouling. | ||||
In stock
A7T.SPEED , HARD MATRIX ANTIFOULING, DESIGNED TO APPLY TO QUEUES AND PROPELLERS 0.75 L, black — 151030 А7 NTX
A7 T.speed
HARD MATRIX
ANTIFOULING
   |
► 12.5 m2/L per coat, 3 to 4 coats are recommended
► At 15°C - wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Packing: 0.75 L
► Colour: black
| A7 T.Speed antifouling can be applied on protected aluminium engine drive legs and propellers. The hardy spray allows easy application (painting areas of the give leg which, are difficult to reach with a brush). You can apply A7 T.Speed directly on top of the original coating of the engine provided that surface has been degreased and sanded. On bare aluminium applay first one coat of Acralu before PA or P7 primer and then antifouling. | ||||
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 2.5L, deep blue — 150771 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
  |
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: navy blue
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 0.75L, deep blue — 150770 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 0.75 L
► Colour: navy blue
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 2.5L, black — 150731 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: black
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 0.75L, black — 150730 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 0.75 L
► Colour: black
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
WHITE GELCOAT 200 g — E3940200 TREM
"4 in 1" high-resistance bicomponent white GELCOAT. To be used like a regular filler to be knifed out: the final result is a bright white finish restoring the original chipped, scratched or dented gelcoat surface. It can be coated.
Order request
