PAINTS

SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.

• Category: production, care and maintenance
• Surface: laminate, wood, steel
• Area: below waterline
• Color: grey, red, navy blue, black, green
• Theoretical coverage: 8-9 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: easy application, fast drying time

PRODUCT DISCRIPTION :
NEW Gelcoat Filler is very fast hard and easy in use.

• Hardener is a paste
• Recommended for filling minor scratches and splinters in gelcoat
• Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
• Adapted to work in an environment with high humidity
• Creates a protective coating for water and the impact of UV radiation
• After curing provides a high gloss, hard, clean and shiny surface
• Resistant to prolonged exposure to even very polluted environment
• When dry, does not remain sticky

• 2-component epoxy anti-corrosive primer.
• Recommended for priming steel and aluminum.
• Excellent substrate protection against corrosion.
• Provides very good adhesion.
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room for mixing them.
• First layer: Raw surface, epoxy or polyester filler, epoxy primers
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval

LAMB`S WOOL POLISHING PADS „D” TYPE

There are available type „D” pads in yellow color and bigger cutting power.

LAMB`S WOOL POLISHING PADS „D” TYPE

There are available type „D” pads in yellow color and bigger cutting power.

Especially recommended for topcoat paint – enamel, paints, varnish, clear coats and gel coats. Computer molded fiber with a length of 51mm KONEX of appropriate hardness combined with the highest quality topcoats guarantees a proper leveling of paint. The ideal thickness of the brush (8 mm) for easy application of the right amount of paint for one coating layer.

Made from the natural lamb wool (100%) of the fleece long-guests 4mm is the perfect tool for the application of polyurethane lacquers and enamels, epoxy primers and antifouling. Unilateral rounded finish with a unique welded seam can operate in difficult and inaccessible places.

Made from the natural lamb wool (100%) of the fleece long-guests 4mm is the perfect tool for the application of polyurethane lacquers and enamels, epoxy primers and antifouling. Unilateral rounded finish with a unique welded seam can operate in difficult and inaccessible places.

Silicone remover is the product used for surface cleaning before lacquering. It removes silicone, wax or grease soil. May be used for laminate, metal or plastic surfaces.