PAINTS

SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.

• Category: production, care and maintenance
• Surface: laminate, wood, steel
• Area: below waterline
• Color: grey, red, navy blue, black, green
• Theoretical coverage: 8-9 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: easy application, fast drying time

SELF - POLISHING ANTIFOULING is dedicated for sailing and motor boats with maximum speed of 40 knots. Do not use on aluminum.

• Category: production, care and maintenance
• Surface: laminate, wood, steel
• Area: below waterline
• Color: grey, red, navy blue, black, green
• Theoretical coverage: 8-9 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: easy application, fast drying time

PRODUCT DISCRIPTION :
NEW Gelcoat Filler is very fast hard and easy in use.

• Hardener is a paste
• Recommended for filling minor scratches and splinters in gelcoat
• Dense texture of the base causes the weight of gel coat does not flow from vertical surfaces
• Adapted to work in an environment with high humidity
• Creates a protective coating for water and the impact of UV radiation
• After curing provides a high gloss, hard, clean and shiny surface
• Resistant to prolonged exposure to even very polluted environment
• When dry, does not remain sticky

• 2-component epoxy anti-corrosive primer.
• Recommended for priming steel and aluminum.
• Excellent substrate protection against corrosion.
• Provides very good adhesion.
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room for mixing them.
• First layer: Raw surface, epoxy or polyester filler, epoxy primers
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval

LAMB`S WOOL POLISHING PADS „MM” TYPE

Type „MM” polishing pads is meant for polishing of gelcoats, tool gelcoats, paints, varnishes, plexi and polycarbonates.
The polishing pads is made of 100% natural lamb wool.

POLISHING WOOLS

The polishing pads are made for polishing gelcoats, tool gelcoats, paints, PU varnishes, plexi and polycarbonates.
The polishing pads are made of 100% natural wool.

LAMB`S WOOL POLISHING PADS „D” TYPE

There are available type „D” pads in yellow color and bigger cutting power.

LAMB`S WOOL POLISHING PADS „D” TYPE

There are available type „D” pads in yellow color and bigger cutting power.

Especially recommended for topcoat paint – enamel, paints, varnish, clear coats and gel coats. Computer molded fiber with a length of 51mm KONEX of appropriate hardness combined with the highest quality topcoats guarantees a proper leveling of paint. The ideal thickness of the brush (8 mm) for easy application of the right amount of paint for one coating layer.