SOROMAP

This inflatable paint is a satin-finish paint, for the renovation of PVC craft.

This inflatable paint is a satin-finish paint, for the renovation of PVC craft.

PREPARATION OF SURFACE
The surfaces must be clean, dry, and de-greased with MEK (in contact with MEK, PVC becomes scaly). Allow to dry.

APPLICATION
This adhesive is used with the hardener, at a rate of 4 % (or 40 ml per litre).
Mix 4 % of hardener with the desired amount of adhesive. Mix to get an even consistency.
Coat the two surfaces using a brush, applying an even film. Leave to dry for 5 to 10 minutes. When the adhesive begins to set, apply a second coat
of adhesive. Leave to dry for 10 minutes, then join and press firmly. Adhesion is immediate.
Full effectiveness is achieved after 48 hours. This process is carried out ideally at a temperature of 20°C and a relative humidity of less than 65%.

PACKING AND STORAGE
Packaging : 250 cc
Storage: 12 months in our original containers, hermetically sealed and between 5 and 25°C.
Cold, the viscosity increases until the formation of a solid gel in white glue revovers its properties after retun to 20°C.