PAINTS

Floating lines equipped with a permanent adhesive which makes the line similar to a painted one.

45 mm / 10 m

• 2-component epoxy anti-corrosive primer.
• Recommended for priming steel and aluminum.
• Excellent substrate protection against corrosion.
• Provides very good adhesion.
• Good flow gives a perfect finish.
• Easy to mix and apply.
• Caution: do not drip onto vertical surfaces.
• Cans contain components and room for mixing them.
• First layer: Raw surface, epoxy or polyester filler, epoxy primers
• Second layer: epoxy primer, polyurethane topcoat, antifouling paints.
• Does not require sanding between coats while maintaining the suggested time interval

LAMB`S WOOL POLISHING PADS „MM” TYPE

Type „MM” polishing pads is meant for polishing of gelcoats, tool gelcoats, paints, varnishes, plexi and polycarbonates.
The polishing pads is made of 100% natural lamb wool.

POLISHING WOOLS

The polishing pads are made for polishing gelcoats, tool gelcoats, paints, PU varnishes, plexi and polycarbonates.
The polishing pads are made of 100% natural wool.

Silicone remover is the product used for surface cleaning before lacquering. It removes silicone, wax or grease soil. May be used for laminate, metal or plastic surfaces.

Thinner for Polyurethan 2K provide appropriate application parameters such as flow, pot life and drying time. Adequate thinning level enables for different application methods.

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

SELF POLISHING ALUPLUS ANTIFOULING new generation biocide based paint, designated for sailing and motor boats, moving at a maximum speed of 40 knots. The paint’s efficiency and effectiveness is 30% higher than for traditional products.

• Category: production, care and maintenance
• Surface: laminate, wood, steel, aluminum
• Area: below waterline
• Color: white, navy blue, black
• Theoretical coverage: 11-12 m²/l for 50µm DTF
• Application: brush, roll
• Touch dry: 1 hour
• Launching time: minimum 12 hours after painting
• Advantages: can be used on vessels or elements made of aluminum, high efficiency

Transparent 1K (1-component) varnish dedicated for wooden boats and yachts. Yacht Varnish is characterized by great flow, UV rays resistance and high gloss.

• Category: production, repair
• Surface: wood, paints and varnishes
• Area: above waterline, interior
• Theoretical coverage: 12-13 m²/l for 40µm DTF
• Application: brush, roll, spray gun
• Touch dry: 3 hours in temp. 20°C
• Advantages: easy application, enables quick repair

1-component chlorinated rubber primer, recommended as a layer increasing adhesiveness to the surface for all 1K Sea-Line paints and varnishes as a barrier surface, used directly on an old anti-fouling paint layer.

• Category: production, repair
• Surface: laminates, steel, wood, porous
• surfaces
• Area: above and below waterline
• Color: grey
• Theoretical coverage:
• 7 m²/l for 65µm DTF
• Application: brush, roll, spray gun
• Touch dry: 4hours in temp. 20°C
• Advantages: separating layer, reinforcing
• the structure of the substrate