PAINTS
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 2.5L, deep blue — 150771 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
       |
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: navy blue
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 0.75L, deep blue — 150770 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 0.75 L
► Colour: navy blue
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 2.5L, black — 150731 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 2.5 L
► Colour: black
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
A4T.SPEED , HARD MATRIX ANTIFOULING WITH SLIDING AGENTS 0.75L, black — 150730 А4T.SPEED NTX
A4 T.speed
HIGH PERFORMANCE WITH SLIDING AGENTS
FOR POWER BOATS AND RACING SAILING BOATS
|
► Hard matrix, copper-based
► 12.5 m2/L per coat
► 2 coats are recommended
► At 15°C: wait 3 h between coats
► 3 h before launching
► Thinner: DA
► Recommended primers:
► Adhesion: P1, PO или PE
► Protection: PO, PE или HPE (2 coats)
► Osmosis prevention: PO или HPE (5 coats)
► Anticorrosion: PA (3 coats minimum)
► Classic wood: P1
► Packing: 0.75 L
► Colour: black
| You race and you want to polish your hull during the sesson with ultra fine sand paper or you enjoy high speeds aboard you "speed boat": choose Nautix A4 T.Speed antifouling | ||||
|---|---|---|---|---|
| Nautix A4 T.Speed is the international reference for skippers and project managers, from the MINI 6.50 m, through to the Figaros and Open 50 and 60 feet, up to the MAXI 70 footers. |
Order request
HARD MATRIX ANTIFOULING FOR INFLATABLES/TENDERS — 151060 A8 NTX
A8
АНТИФАУЛИНГ ЗА RIB И НАДУВАЕМИ ЛОДКИ
      |
► Hard matrix, copper based
► The product can be applied directly on the tubes into a thin layer
► 10 m2/L per coat
► 1 thin coat is recommended on tubes
► At 15°C wait 3 h between coast
► 3 h before launching
► Thinner: DA
► Recommended primer on GRP:
► For adhesion: only P1
► Packing: 0.75 L
► Color: black / grey / white
| The Nautix A8 antifouling is especially inflatable boats. | ||||
|---|---|---|---|---|
| This product is ideal for inflatable boats that stay in water several months per year. A8 can be applied directly on the tubes in a thin layer. The A8 also adheres very well on all gelcoat previously prepared with Nautix primers P1 or epoxy PE or HPE. |
Order request
TK GEL COAT SPRAY PURE WHITE 400 ml — E3940604 TREM
High density spray paint for fiberglass treated with gelcoat and Polyester resin.
Renews treated surfaces equally and allows a quick cover by flattening porosities.
Order request
